- Manure Spreader Transport Services
- Cost Shipping Factors For Manure Spreader
- Distance To The Destination
- The Size Of The Equipment
- What To Look For In A Heavy Equipment Shipping Company
- Preparing Your Manure Spreader For Shipping
- Get In Touch With A-1 To Ship Your Manure Spreader
Manure Spreader Transport Services
Manure spreaders, commonly called Muck Spreaders, are a group of heavy equipment used to spread the by-products of livestock on the farm as fertilizer.
Transporting a manure spreader around the farm isn’t as complicated as transporting it long-distance. This is why many farmers need professional help.
If you decide to transport your manure spreader yourself, you might run into problems and even damage the equipment. Heavy equipment can be expensive, so it needs to be protected.
The cost of shipping a manure spreader varies widely and can range from $1.5 to $4 per mile. To get an accurate amount for your manure spreader, contact A-1 Auto Transport for a shipping quote.
Cost Shipping Factors for Manure Spreader
There is wide variation in the shipping cost of manure spreaders and that is because of the various factors that affect the cost of shipping heavy equipment. Some of these factors include the distance to the destination and the equipment size.
Distance to the Destination
The distance is a major factor that influences the shipping cost of a manure spreader. A farther distance will require more resources, and more resources will result in higher shipping quotes.
Manure spreaders may be shipped for $790 over a distance of 452 miles, but may be shipped for $4700 over a distance of 2700 miles.
Keep in mind that the shipping rate decreases as the distance to the destination increases. Therefore, you may have to pay as much as $5 per mile for distances under 200 miles and as little as $1 per mile for distances over 2000 miles.
The Size of the Equipment
This is a primary factor that is considered by the moving company when submitting a shipping quote. The bigger or heavier the equipment, the higher the shipping rate.
This is because the bigger the equipment you are shipping is, the less the space to transport other vehicles on the same truck. There is heavy equipment that occupies the entire truck bed, and this will result in higher charges.
The equipment’s size can double the shipping rate to the same destination. For example, if you were to pay $2 per mile for shipping a manure spreader, you might pay as much as $5 if it was much larger.
What to Look for in a Heavy Equipment Shipping Company
Your company needs professional help moving its manure spreader. The things to look for in the company you intend to hire include experience and license.
Experience is important because, without it, you might be handing your equipment over to a company that will damage it out of error. Find out how many years of operation the company you are hiring has.
The company you want to hire should be licensed to ship heavy equipment. This will protect you from scammers who are never licensed. Hiring a licensed company also protects you if there is a breach of contract.
Preparing Your Manure Spreader for Shipping
- You will need to measure the manure spreader accurately and submit the dimensions to the shipping company.
- Remove attachments like shields and deflectors before the equipment is loaded.
Get In Touch with A-1 to Ship Your Manure Spreader
There is nothing else to do but contact us to transport your manure spreader. Dial 888-230-9116 or contact us on our website.
Frequently Asked Questions
What is the average cost to ship a Manure Spreader?
The most prominent factor affecting the cost of shipping a manure spreader is its heavy load. This is because oversized loads require a permit to transport.
Rather than all the permits being available on the Department of Transport website, a shipping company has to apply for separate licenses in each state the spreader will pass. Sometimes, individual cities and towns have their permits as well.
This factor drives up the cost significantly since it's time-consuming. The final price is affected by traffic density, flow, weather conditions, and distance.
What is the best option to ship a Manure Spreader?
The best option to transport a manure spreader depends on your model, which is why you should check its dimensions before you call your shipping company to have it loaded for the journey.
Some models can weigh around 29,000 pounds, which makes them easy to transport. A standard flatbed trailer, which can hold 40,000 pounds, is enough.
Alternately, if you own a heavier model that weighs 48,000 pounds or higher, the process is more complicated. The primary factor is that anything over 46000 pounds is an oversized load.
Usually, a lowboy trailer is the best choice for heavy loads because a four-axle variant can easily accommodate up to 80,000 pounds. In most cases, a two-axle version is enough for the journey.
How many days may take to ship a Manure Spreader?
This answer changes according to various factors, the most prominent one being where your pickup and drop-off locations are. The longer the distance between the two areas, the longer it will take for the company to move your manure spreader.
Apart from the location, social factors also affect the total delivery time. More traffic means it's harder for the driver to ensure your manure spreader reaches you quickly. Similarly, some states might have extreme weather conditions like storms or heavy rainfall.
Both mean that the driver can't continue, so it further lengthens the time it takes for your spreader to reach its new location. That's why you must inform your company some weeks in advance. The logistics team will figure out the best route for the driver.
Why should I ship a Manure Spreader?
No matter how experienced you handle a manure spreader, make sure you hire a reputable shipping company to transport it to a new location. It's easy to get used to driving a muck spreader on a farm, but transporting it over a long distance is another story.
You must have experienced personnel who can efficiently handle the heavy equipment, including the loading and unloading, without causing any damage. You might have sold your spreader or taken it to another farm you own.
Whether it's close by or a few states over, hiring a company is brilliant, especially since some models are oversized.
Share on Facebook 
Share on LinkedIn 
Share on Twitter 
